H3C Technologies H3C Intelligent Management Center - Manual (Page 123)

101
5. Click More, and select Configuration Management or Wireless Logical Interface Configuration
to enter the configuration page.
If the Service Policy List contains enough entries, the following navigational aids are displayed.
Navigating the Service Policy List
• Click the Next Page icon to page forward in the Service Policy List.
• Click the Last Page icon to page forward to the end of the Service Policy List.
• Click the Previous Page icon to page backward in the Service Policy List.
• Click the First Page icon to page backward to the front of the Service Policy List.
To configure the number of items you want to display on each page, click 8, 15, 50, 100, or 200 at
the upper right of the Service Policy List.
Viewing service policy details
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
The AC List page displays all ACs.
3. Click the Operation icon for the AC you want to view.
4. Select Service Policy from the menu.
The Service Policy Management page appears. All the service policy information of the AC is
displayed on the Service Policy List.
5. Click the ID of a service policy to view its basic information.
Service policy basic information
{
Policy ID—ID of the service policy.
{
SSID—SSID of the service policy.
{
Encryption Mode—Encryption mode for the service policy. Options are:
− Clear—No data packets need to be encrypted.
− Crypto—All data packets need to be encrypted.
{
Hide SSID—Indicates whether to provide the SSID in beacon frames sent by the fit AP. If this
parameter is selected, clients cannot obtain the SSID from the beacon frames and must
configure the SSID before accessing the wireless network. If this parameter is not selected,
clients can obtain the SSID from the beacon frames to access the wireless network.
{
Enable Status—Indicates whether the service policy is enabled. Options are:
− Enable—Indicates the service policy is enabled on the AC and the AC can provide
services.
− Disable—Indicates the service policy is not enabled on the AC and the AC cannot
provide services.
− Not Ready—Indicates the service policy is being deployed to the AC and the AC cannot
provide services.
{
Authentication Mode—Authentication mode of the service policy. Options are:
− Open System—Allows all clients requesting for authentication to directly pass
authentication.