H3C Technologies H3C Intelligent Management Center - Manual (Page 284)

262
provide WLAN services. Operating in hybrid mode, the fit AP can both scan devices in the
WLAN and act as a wireless access point.
{
Respond to Broadcast Probes—Enable or disable the fit AP to respond to the broadcasts sent
by clients.
{
Connection Priority—Enter the connection priority of the fit AP. If multiple ACs are available,
the fit AP connects to the AC with the highest connection priority. The value range is 0 to 7.
A greater value represents a high priority.
{
Client Idle-Timeout Interval (s)—Enter the maximum interval for which the link between the fit
AP and a client can be idle. If the fit AP does not receive any frame sent by the client within
the maximum interval, the AC terminates the connection between the fit AP and the client.
{
Client Keep-Alive Interval (s)—Enter the client keep-alive interval. The keep-alive mechanism
is used to detect clients segregated from the system. The fit AP sends probe requests to a
client. If the fit AP cannot receive any response, the AC terminates the connection between
the fit AP and the client.
{
Description—Enter a description for the fit AP.
{
Enable Mesh Portal Service—Enable or disable mesh portal service for the fit AP. Yes means
to enable the mesh portal service and the fit AP can operate as an MPP in a mesh network.
No means not to enable the mesh portal service. Before configuring this parameter, make
sure the fit AP supports mesh. If the fit AP does not support mesh, the configuration fails. For
more information, see the device manual of the fit AP.
{
Synchronize AC Configuration—Apply the configuration in the fit AP template to all ACs in
the specified AC group. To apply the configuration in the fit AP template only to the current
AC, do not select this option. This option is available only when the AC belongs to at least
one AC group.
{
AC Group—Select an AC group. Options are all AC groups to which the current AC belongs.
This option is available only when Synchronize AC Configuration is selected.
{
Other Connection Priority—Enter the connection priority of the fit AP for connecting to other
ACs in the AC group. If multiple ACs are available, the fit AP connects to the AC with the
highest connection priority. The value range is 0 to 7. A greater value represents a high
priority.
7. Click OK.
Importing a fit AP template
WSM uses the serial numbers of fit APs as keywords when importing a fit AP template. The import file
must be a .csv file. WSM also imports the first line of an import file as fit AP template information. If
the import file contains more than 3,000 lines, WSM only imports the first 3,000 lines.
To import a fit AP template:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
3. The AC List page displays all ACs.
4. Click the Operation icon for the target AC and from the menu, select Fit AP List.
The Fit AP List page displays all fit APs.
5. Click Import.
6. Continue the procedure in one of the following ways: