Hotspot statistics report by hotspot – H3C Technologies H3C Intelligent Management Center User Manual
Page 713
691
•
Received Radio Traffic (MB)—Total traffic received by the APs that use the SSID.
•
Max Online Client Number—Maximum number of clients associated with the APs that use the
SSID.
•
Avg Online Client Number—Average number of clients associated with the APs that use the SSID.
•
Availability (%)—Percentage of time the APs that use the SSID are available.
Hotspot statistics report by hotspot
This report displays the location views that are set as hotspots.
show an example hotspot statistics report by hotspot.
Figure 145 Hotspot statistics report by hotspot
Hotspot statistics report by hotspot fields:
•
Report Period—Time range during which the statistics are collected.
•
Location—Name of the location view for which the statistics are collected or All AP Devices.
•
Hotspot Name—Name of the location view that is set as a hotspot.
•
AP Number—Number of APs contained in the hotspot location view.
•
Online AP Number—Number of online APs contained in the hotspot location view.
•
Availability (%)—Percentage of time the APs are available. Busy APs—Number of busy APs in
the hotspot location view. An AP is considered busy when its peak number of online clients or
peak transmission rate reaches the specified threshold.
•
Idle APs—Number of idle APs in the hotspot location view. An AP is considered idle when its
peak number of online clients or peak transmission rate drops below the specified threshold. For
information about configuring these thresholds, see "
•
Worst APs—Number of worst APs in the hotspot location view. An AP is considered as worst
when its out of service rate or association congestion rate reaches the specified threshold.
•
Transmitted Traffic (MB)—Total traffic transmitted by the APs in the hotspot location view.
•
Received Traffic (MB)—Total traffic received by the APs in the hotspot location view.
•
Packet Retransmit Ratio (%)—Ratio of the number of retransmitted packets to the total number of
packets transmitted by the APs in the hotspot location view.
•
Error Frame Ratio (%)—Ratio of the number of error frames to the total number of frames
received by the APs in the hotspot location view.
•
Max Transmit Speed (Mb/s)—Maximum transmission speed of the APs in the hotspot location
view.
•
Avg Transmit Speed (Mb/s)—Average transmission speed of the APs in the hotspot location view.
•
Max Receive Speed (Mb/s)—Maximum reception speed of the APs in the hotspot location view.