H3C Technologies H3C Intelligent Management Center - Manual (Page 292)

270
{
Peak Reception Rate (bps)—Maximum reception rate for the fit AP in the statistics collection
time range. The measurement unit automatically changes as the data changes.
{
Average Transmission Rate (bps)—Average transmission rate for the fit AP in the statistics
collection time range. The measurement unit automatically changes as the data changes.
{
Average Reception Rate (bps)—Average reception rate for the fit AP in the statistics collection
time range. The measurement unit automatically changes as the data changes.
Rate Details
{
Time—Time when statistics are collected, in the format YYYY-MM-DD hh:mm:ss.
{
Transmission Rate (bps)—Transmission rate of the fit AP at the specified time. The
measurement unit automatically changes as the data changes.
{
Reception Rate (bps)—Reception rate of the fit AP at the specified time. The measurement unit
automatically changes as the data changes.
Traffic Statistics
The unit of traffic changes with the amount of traffic sent or received.
If you select Traffic, the following information is displayed:
{
Start Time—Start time for statistics collection, in the format YYYY-MM-DD hh:mm:ss.
{
End Time—End time for statistics collection, in the format YYYY-MM-DD hh:mm:ss.
{
Transmitted Traffic (MB)—Total traffic sent by the fit AP within the specified time range. The
measurement unit automatically changes as the data changes.
{
Received Traffic (MB)—Total traffic received by the fit AP within the specified time range. The
measurement unit automatically changes as the data changes.
{
Total Traffic (B)—Total traffic sent and received by the fit AP within the specified time range.
The value is calculated based on statistics and might be slightly different from the actual
value. The measurement unit automatically changes as the data changes.
Association Statistics
If you select Association, the following information is displayed:
{
Access Requests—Number of association requests received by the fit AP within the specified
time range.
{
Response Requests—Number of association responses sent by the fit AP within the specified
time range.
{
Successful Logins—Number of successful associations within the specified time range.
{
Abnormal Logoffs—Abnormal offline count of the successfully associated clients within the
specified time range.
{
Association Success Rate—Number of successful associations of clients to the number of
association requests sent by the fit AP in percentage within the specified time range.
{
Relevant Blocking Rate—Number of failed associations of clients due to insufficient fit AP
resource to the number of successful associations in percentage within the specified time
range.
{
Dropping Rate—Abnormal offline count to successful association count of the clients within
the specified time range, in percentage.
Connectivity Statistics
If you select Connectivity, the following information is displayed:
{
Logoff Time—Offline time of the fit AP, in the format YYYY-MM-DD hh:mm:ss.