H3C Technologies H3C Intelligent Management Center - Manual (Page 204)

182
10. Click Query.
The Fat AP List displays all fat APs matching the query criteria. To clear the query criteria and
display all fat APs, click Reset.
11. Select the fat APs where a WLAN is to be deleted.
12. Click OK.
The selected fat APs appear in the Fat AP List.
13. Click OK.
WSM starts deleting the WLANs with the specified SSID on the selected fat APs, and displays
the operation results when the operation is complete.
14. Click Back to go back to the Batch Delete WLANs page.
Configuring radios in batches
To facilitate radio configuration and reduce repetitive operations, WSM enables you to configure, in
batches, the public parameters for more radios of the fat APs.
Parameters include the radio type, channel in use, administrative status, maximum transmit power,
operating mode, and description.
To configure radios in batches:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3. Click the MSM tab.
4. In the Fat AP Batch Configuration Management (HP) area, click Radio Batch Configuration.
The Radio Batch Configuration page appears.
NOTE:
The Fat AP Batch Configuration Management (HP) area appears on the configuration
management page only after the MSM series fat AP is added to the IMC Platform.
5. Select the boxes to the left of the parameters to be configured, and enter the parameters as
required.
{
Radio Type—Select a radio type from the list. These are the radio type options:
− 802.11a
− 802.11b
− 802.11g
− 802.11bg
− 802.11at
− 802.11an
− 802.11gn
− 802.11n (2.4GHz)
− 802.11bgn
− 802.11n