H3C Technologies H3C Intelligent Management Center - Manual (Page 113)

91
− 802.11n
− 802.11n (5GHz)
{
Admin Status—Select an administrative state for the radio. Options are Unlimited, Up, and
Down.
{
Radio Policy Name—Enter the name of the radio policy bound to the radio. WSM supports
fuzzy matching for this field.
{
Location—Enter or select the name of the location view to which the fit AP belongs. WSM
supports fuzzy matching for this field.
An empty field or a field that is set to Unlimited does not serve as a query criterion.
8. Click Query. The Radio List displays all radios matching the query criteria. Click Reset to clear
the query criteria and display all radios.
9. Select the radios to be bound to the radio policy.
10. Click OK to close the Select Device window. The Radio List displays all selected radios.
11. Click Bind.
The Result List page appears, displaying the successful and failed binding operations. If a
failure occurs, click the Details icon in the Operation Result column to identify the reason for the
failure.
Unbinding a radio policy from radios
The default radio policy default_rp is bound to all radios and cannot be unbound.
To unbind radios from a user-defined radio policy:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
The AC List page displays all ACs.
3. Click the Operation icon for the target AC.
4. Select Radio Policy from the menu.
The Radio Policy Management page appears. All the radio policy information of the AC is
displayed on Radio Policy List.
5. Click the Operation icon for the radio policy you want to unbind from radios.
6. Select Bound Radios from the menu.
The Radio List dialog box appears.
7. Select the radios you want to unbind.
8. Set the following parameters as needed:
{
Synchronize AC Configuration—Unbind radios from the radio policy on all ACs in the
specified AC group. To unbind radios from the radio policy only on the current AC, do not
select this option. This option is available only when the AC belongs to at least one AC
group.
{
AC Group—Select an AC group. Options are all AC groups to which the current AC belongs.
This option is available only when Synchronize AC Configuration is selected.
9. Click Unbind.
The Result List page appears, displaying the successful and failed unbinding operations. Click
the Details icon in the Operation column to identify the reason for the failure.