H3C Technologies H3C Intelligent Management Center - Manual (Page 505)

483
The Detected Client List displays all detected SSIDs.
Detected Client List contents
{
Status—Online state of the client, Online or Offline.
{
MAC Address—MAC address of the client.
{
BSSID—BSSID (MAC address) of the AP with which the client is associated. Click the BSSID
to view the AP details.
{
Virtual Security Domain—Virtual security domain to which the sensor that detected the client
belongs.
{
Category—Category of the client, which can be Authorized, Unauthorized, Misassociated,
and Uncategorized.
{
Detecting AC—Device label of the AC with which the sensor that detected the client was
associated. Click the label to view the AC details.
{
Last Detection Time—Time when the client was first detected.
{
Static List Status—Whether or not the client is on the Static Trusted Address List, Alarm-
Ignored Address List, Static Blocked Address List, and Countermeasures Address List.
The green icon
indicates that the client is on the list. Click the icon to remove the client
from the list.
The gray icon indicates that the client is not on the list. Click the icon to add the client to
the list.
An AP cannot be on the Static Trusted Address List and the Static Blocked Address List at the
same time.
{
Locate—Click the Locate icon to display the client in the location view where the sensor
that detected the client resides. If the sensor is not in the location view, the operation fails.
If the Detected Client List contains enough entries, the following navigational aids appear:
{
Click to page forward in the Detected Client List.
{
Click to page forward to the end of the Detected Client List.
{
Click to page backward in the Detected Client List.
{
Click to page backward to the front of the Detected Client List.
3. Click 8, 15, 50, 100, or 200 on the right side of the main pane to specify the number of items
you want to display on each page.
NOTE:
You can sort the Detected Client List by all fields except the Static List Status field. Click the column
label to sort the list by the selected field. The column label allows you to toggle between the various sort
options specific to each field.
Synchronizing detected clients
By default, IMC synchronizes the most recent client information detected by WIPS from managed ACs
every 2 hours. You can also manually perform the synchronization operation.
To manually synchronize detected client information from managed ACs:
1. Click the Service tab.