H3C Technologies H3C Intelligent Management Center - Manual (Page 64)

42
Figure 43 AP Bandwidth
The horizontal axis represents the time range, and the vertical axis represents the number of clients.
The time intervals in the horizontal axis automatically adjust to the specified time range.
You can view the changes in the transmit rate and the receive rate for the AP at the wireless side
within a specific time range. Options are Today, 1h, 1d, 1w, 1m, 1y, and Custom.
If you select Custom, set the start time and the end time:
1. Click Custom.
In the Custom window that appears, enter a start time and end time, or select the start time/end
time from the calendar that appears, in the format of YYYY-MM-DD hh:mm. The end time must
be later than the start time.
2. Click Query.
The trend graph displays changes in the transmit rate and the receive rate for the AP at the
wireless side within the specified time range.
Viewing the AP bandwidth details
1. Click AP Bandwidth on top of the trend graph.
The Details window appears. It displays the transmit rate and the receive rate of the AP at a
specific time.
2. To close the window, click .
Viewing the TopN traffic statistics
The TopN Traffic page is shown in Figure 44 .
The TopN Traffic page contains the following lists:
• TopN AP Traffic – Today
The list shows the TopN APs with the most traffic, in descending order. The list displays the
transmit traffic, the receive traffic, and total traffic statistics.
• TopN Location Traffic – Today