H3C Technologies H3C Intelligent Management Center - Manual (Page 202)

180
{
Location—Enter or select the name of the location view to which the fat AP belongs. WSM
supports fuzzy matching for this field.
If you leave a field empty or set a field to Unlimited, the field does not serve as a query
criterion.
10. Click Query.
The Fat AP List displays all fat APs matching the query criteria. To clear the query criteria and
display all fat APs, click Reset.
NOTE:
To avoid configuration failures, configure fat APs of the same model in batches. If the fat APs are
of different models, configure fat APs of each model separately.
11. Select the desired fat APs.
12. Click OK.
The selected fat APs appear in the Fat AP List.
13. Click OK.
WSM starts modifying the WLANs on the selected fat APs, and displays the operation results
when the operation is complete.
14. Click Back to go back to the Batch Modify WLANs page.
Batch deleting WLANs
This function allows you to delete, in batches, the WLANs with the same SSID on more fat APs. Before
the operation, make sure the WLAN with the specified SSID exists on the target fat AP. Otherwise, the
operation fails.
To delete WLANs in batches:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3. Click the MSM tab.
4. In the Fat AP Batch Configuration Management (HP) area, click WLAN Batch Configuration.
5. In the WLAN Batch Configuration area, click Batch Delete WLANs.
The Batch Delete WLANs page appears.
NOTE:
The Fat AP Batch Configuration Management (HP) area appears on the configuration
management page only after at least one MSM series fat AP is added to the IMC Platform.
6. Enter the SSID of the WLANs you want to delete in the SSID field.
The string must be 1 to 32 characters in length, and can include digits, letters, and special
characters such as the following:
{
tilde (~)
{
at sign (@)
{
dollar sign ($)