H3C Technologies H3C Intelligent Management Center - Manual (Page 130)

108
Unbinding radios from service policies
You can unbind radios to multiple service polices in batches or unbind radios to one service policy.
Unbinding radios in up state from a service policy interrupts the services provided by the radios and
logs off all clients associated with the radios.
To unbind radios from multiple service policies in batches:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
The AC List page displays all ACs.
3. Click the Operation icon for the target AC.
4. Select Service Policy from the menu.
The Service Policy Management page appears. All the service policy information of the AC is
displayed on Service Policy List.
5. Select the target service policies.
6. Click Add in the Radio List area.
The Select Device dialog box appears.
7. Enter or select one or more of the following query criteria to search for the radios you want to
configure:
{
AP Label—Enter the label of the fit AP to which the radio belongs. WSM supports fuzzy
matching for this field.
{
AP Name—Enter the name of the fit AP to which the radio belongs. WSM supports fuzzy
matching for this field. For example, if you enter B, all radios on fit APs whose names contain
B are queried.
{
Serial Number—Enter the serial number of the fit AP to which the radio belongs. WSM
supports fuzzy matching for this field.
{
Radio Type—Select a radio type. Options are:
− 802.11a
− 802.11b
− 802.11g
− 802.11gn
− 802.11an.
{
Admin Status—Select an administrative state for the radio. Options are Up and Down.
{
Radio Policy Name—Enter the name of the radio policy bound to the radio. WSM supports
fuzzy matching for this field.
{
Location—Enter or select the name of the location view to which the fit AP belongs. WSM
supports fuzzy matching for this field.
An empty field or a field that is set to Unlimited does not serve as a query criterion.
8. Click Query. The Radio List displays all radios matching the query criteria. Click Reset to clear
the query criteria and display all radios.
9. Select the radios you want to unbind from service policies.
10. Click OK to close the Select Radios window.
The Radio List displays all selected radios.