H3C Technologies H3C Intelligent Management Center - Manual (Page 78)

56
From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
2. Click the Operation icon for the target AC.
3. Select Group Configuration from the menu.
The Group List displays all fit AP groups on the AC.
4. Click Modify icon for the group you want to modify.
The Modify Group window appears.
5. Modify the group name in the Name field.
6. Click the box next to the Inherited field to enable fit APs in the group to inherit the
country/region code of the AC to which the group belongs.
Or clear the box and then manually configure a country code for the group in the
Country/Region Code field.
7. Select the country/region code for the group from the Country/Region Code list. This parameter
is valid only when the Inherited option is not selected.
8. Click OK.
Batch binding/unbinding WLANs with a group
This function allows you to view all of the WLANs bound to a fit AP group, bind WLANs in batches,
or remove WLAN bindings in batches.
To bind/unbind WLANs with a fit AP group in batches:
1. Click the Service tab.
From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
2. Click the Operation icon for an AC.
3. Select Group Configuration from the menu.
The Group List displays all fit AP groups on the AC.
4. Click the Bind to WLAN icon for the target group.
The Bound WLAN List displays all WLANs on the AC. A checked box indicates the WLAN is
already bound to a group.
5. Click the boxes for the WLANs you want to bind to the group, and configure the following
parameters in one of the following ways:
{
Egress Network—Select the VLAN bound to the AC. Options include all VLAN IDs
configured on the AC.
{
Dual-Radio Behavior—Select the radios bound to the fit APs. Options are Both Radios, Radio
1 Only, and Radio 2 Only.
Or
Clear the boxes for the WLANs you want to unbind from the group.
6. Click OK.