Wips dynamic detection information, Detected channel list, Viewing the detected channel list – H3C Technologies H3C Intelligent Management Center User Manual
Page 488
466
{
Click the Operation icon
for the virtual security domain you want to delete, and select
Delete from the menu.
A confirmation dialog box appears.
5.
Click OK.
WIPS dynamic detection information
WSM displays the summary dynamic detection information collected from all managed ACs on the
following lists:
•
•
•
•
•
Detected channel list
The Detected Channel List displays the channels detected by the sensors and whether or not the
channels are permitted.
The sensors can only detect channels that are supported by the country/region code.
Viewing the detected channel list
1.
Click the Service tab.
2.
Select WLAN Manager > WIPS Management > Dynamic Detection Information from the
navigation tree.
3.
Click the Detected Channel List tab.
The Detected Channel List displays all detected channels.
Detected Channel List
{
Channel Number—Channel number.
{
Radio Type—Type of radios operating on the channel: 802.11a, 802.11b, 802.11g, 802.11gn,
or 802.11an.
{
Last Detection Time—Time when the channel was last detected to be in use.
{
Permitted Channel—Whether or not the channel is permitted: Yes or No.
{
Detecting AC—Label of the AC with which the sensor that detected the channel is associated.
Click the AC label to view its details.
4.
If the Detected Channel List contains enough entries, the following navigational aids appear:
{
Click
to page forward in the Detected Channel List.
{
Click
to page forward to the end of the Detected Channel List.
{
Click
to page backward in the Detected Channel List.
{
Click
to page backward to the front of the Detected Channel List.
5.
Click 8, 15, 50, 100, or 200 on the right side of the main pane to specify the number of items
you want to display on each page.