H3C Technologies H3C Intelligent Management Center - Manual (Page 118)

96
2. From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
Click the Operation icon
for the AC to which you want to add a WLAN logical interface.
3. Select Wireless Logical Interface Configuration from the menu.
The Wireless Logical Interface Configuration page appears. All the WLAN logical interface
information of the AC is displayed on Wireless Logical Interface List.
4. Click Add Interface. The page for adding WLAN logical interfaces appears.
5. Set the following parameters as needed:
{
Interface ID—Enter the ID of the WLAN logical interface. For example, if you add a WLAN
logical interface with the ID 50, the interface description for the interface is WLAN-ESS50.
{
Synchronize AC Configuration—Apply the WLAN logical interface setting to all ACs in the
specified AC group. To apply the WLAN logical interface setting only to the current AC, do
not select this option. This option is available only when the AC belongs to at least one AC
group.
{
AC Group—Select an AC group. Options are all AC groups to which the current AC belongs.
This option is available only when Synchronize AC Configuration is selected.
6. Click OK.
The Adding Interface Result page appears, displaying the operation result for adding the
WLAN logical interface and the result for AC synchronization.
7. Click Back to return to the WLAN Logical Interface Configuration page.
Modifying the port security mode for a WLAN logical
interface
To modify the port security mode of a WLAN logical interface that has been bound to a service
policy, first set the Interface ID of the WLAN logical interface to –1 on the Modify Service Policy page.
To modify the port security mode for a WLAN logical interface:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
The AC List page displays all ACs.
3. Click the Operation icon for the target AC.
4. Select Wireless Logical Interface Configuration from the menu.
The Wireless Logical Interface Configuration page appears. All the WLAN logical interface
information of the AC is displayed on the Wireless Logical Interface List.
5. Click the Operation icon for the target WLAN logical interface, and select Modify Port
Security from the menu.
Or
Select the WLAN logical interface for which you want to modify the port security mode, and
click Modify Port Security on the WLAN Logical Interface List.
The Modify Port Security page appears.
6. Set the following parameters as needed: