H3C Technologies H3C Intelligent Management Center - Manual (Page 293)

271
{
Recovery Time—Time when the fit AP gets online again, in the format YYYY-MM-DD
hh:mm:ss.
{
Logoff Duration—Offline duration of the fit AP, in the format YYYY-MM-DD hh:mm:ss.
8. Click Close.
Viewing clients associated with a fit AP
You can view clients associated with a fit AP from the Fit AP List page.
To view clients associated with a fit AP:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fit APs.
The Fit AP List page displays all fit APs.
3. Click the Total Clients link of the target fit AP.
The Client List displays all online clients associated with the current fit AP.
For more information about the client list, see "
Viewing the client list ."
Viewing radio parameters for a fit AP
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fit APs.
The Fit AP List page displays all fit APs.
3. Click the device label of the target fit AP.
4. The fit AP details page displays the basic information, client information, and radio information
of the current fit AP.
5. In the Radios area, click the ID of the target radio.
6. The Radio Information dialog box appears.
Radio Information contents
{
Radio ID—ID of the radio.
{
Radio Type—Type of the radio. Options are:
− 802.11a
− 802.11b
− 802.11g
− 802.11gn
− 802.11an
{
Admin Status—Administrative state for the radio. Options are Up and Down.
{
Operation Status—Operation state for the radio. Options are Up and Down.
{
Preamble Type—Preamble type for the fit AP. Options are Short and Long. Short means the
fit AP transmits frames with either a short preamble or long preamble. Long means the fit AP
only transmits frames with a long preamble. You can configure this option if you select the
802.11b, 802.11g, or 802.11gn radio type.