26 managing rfs, Entering a location view topology, Adding a background picture – H3C Technologies H3C Intelligent Management Center User Manual
Page 522
500
26 Managing RFs
WSM RF management allows you to view the wireless signal coverage area for maintenance, or for
wireless network planning.
To display the wireless signal coverage area, see the following information:
•
Entering a location view topology
•
•
•
•
Displaying a signal coverage area map
Entering a location view topology
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > View Management > Location View.
The Location List displays all location views.
3.
Enter the location view in one of the following ways:
{
Click the View Topology icon for the location whose topology you want to view.
{
Click the name link of the target location view, and at the upper right of the page that
appears, click the View Topology icon .
The location view topology displays all sublocations and APs in the current location view.
Adding a background picture
1.
On the toolbar at the top of the topology page, click the Add background icon
.
The Topo Background-Picture Setting window appears.
2.
Select a background picture.
You can use a local picture or a picture from the gallery on the server.
To use a local picture:
a.
Select User Upload Picture, and click Browse on the page.
A window appears.
b.
Select a picture, and click Open.
c.
In the Topo Background-Picture Setting window, click Preview.
The selected picture appears in the window.
To select another picture, click Exit.
To use a picture from the server, select a picture from the gallery, and click Select Picture.
3.
Click Set.
The background picture appears in the location view.