H3C Technologies H3C Intelligent Management Center - Manual (Page 436)

414
Viewing detailed information about a rogue client
The detailed information page of a rogue client shows you all information about the rogue client
(including its location and the AP that detected it), and provides you all actions you can perform for
the rogue client in the Action area to the right of the page.
To view detailed information about a rogue client:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager >WIDS Management > Rogue Clients.
3. Click the MAC address link of the rogue client whose detailed information you want to view.
The rogue client's detailed information page appears.
For a rogue client associated with a Comware-based AP, the rogue client details content is as follows:
Rogue client Information
{
MAC Address—MAC address of the rogue client.
{
Detected by—AC to which the AP that detected the rogue client belongs. To view detailed
information about the AC, click the AC link. For field descriptions of the AC's detailed
information, see " 6 Managing Comware-based access controllers ."
{
Vendor—Vendor of the rogue client's network adapter.
{
BSS MAC—MAC address of the device that is providing wireless network service for the
rogue client.
{
First Discovered at—First time the rogue client was detected.
{
Last Discovered at—Last time the rogue client was detected.
{
Max Signal Strength (dBm)—Maximum signal strength of the rogue client.
{
Channel with Max Signal Strength—Channel in which the rogue client was last detected with
the maximum signal strength.
{
Ad Hoc—Whether the rogue client is operating in Ad Hoc mode.
{
Attacked Status—Whether the rogue client has been attacked by the AC. If yes, the value is
Attacked. If not, the value is Not Attacked.
Information of Detected AP
{
Detected by—Detector AP that detected the rogue client. To view detailed information about
the detector AP, click the detector AP link. For field descriptions of the AP's detailed
information, see " 6 Managing Comware-based access controllers ."
{
First Discovered at—First time the detector AP detected the rogue client.
{
Last Discovered at—Last time the detector AP detected the rogue client.
{
Signal Strength—Signal strength of the detector AP
{
Channel— Channel in which the rogue client's access wireless network provides service.
{
Attacked Status—Whether the detector AP has attacked the rogue client. If yes, the value is
Attacked. If not, the value is Not Attacked.
{
Radio ID—Radio that detected the rogue client.
Location
{
Location—Location view that the rogue client is on. To view the devices on a location view,
click the location link. For field descriptions of the device list, see "
21 Managing wireless
views ."