Removing fit aps from a fit ap group, Managing operator privileges, Overview – H3C Technologies H3C Intelligent Management Center User Manual
Page 740
718
{
Serial Number—Enter the serial number of a fit AP. WSM supports fuzzy matching for this
field.
{
IP Address—Enter a partial or complete IPv4 address of the fit AP. WSM supports fuzzy
matching for this field
{
Model—Enter the model of the fit AP. WSM supports fuzzy matching for this field..
{
Online Status—Select an online state for the fit AP. Options are:
−
Unlimited
−
Online
−
Offline.
{
AC—Select an AC. Options are Unlimited and all managed ACs.
{
Location View—Enter or select the name of the location view to which the fit AP belongs.
WSM supports fuzzy matching for this field
8.
Click Query.
The Fit AP List displays all fit APs matching the query criteria.
9.
Select the fit APs you want to add to the fit AP group.
10.
Click OK.
Removing fit APs from a fit AP group
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Configuration Management.
3.
Click the Common tab.
4.
In the Network Management area, click Fit AP Group.
The Fit AP Group List displays all fit AP groups.
5.
Click the Fit AP List icon
for the fit AP group from which you want to remove APs.
6.
Select one or more fit APs that you want to remove, and click Remove.
A confirmation dialog box appears.
7.
Click OK.
Managing operator privileges
WSM extends the privilege assignment functions of the IMC Platform. In addition to privilege
assignment by operator groups, WSM supports assigning specific fit AP groups and level 1 location
views to an operator.
Overview
Location views allow you to manage APs based on geographic locations. Currently, operators are
assigned only level 1 location views. For more information about location views, see "