H3C Technologies H3C Intelligent Management Center - Manual (Page 424)

402
Select an AP monitoring state for the fit APs in the Configure AP Status area. Options are
Enable and Disable. To enable the fit APs to detect rogue APs, set this field to Enable.
6. Click Add in the Fit AP List area.
The Select Devices dialog box appears, displaying all the fit APs managed by the AC.
7. Select one or more fit APs to which you want to apply the configuration, and then click OK.
The selected fit APs appears in the Fit AP List.
8. Click OK.
WSM starts configuring the monitoring status for the selected fit APs, and displays the result list
page when the operation is complete.
9. Click Back to go back to the Detect Fit AP page.
The Device List displays all the fit APs enabled to detect rogue APs.
Exporting authorized APs
You can export managed fit APs for a Comware-based AC, and export external APs, managed APs
(optional) and manually authorized APs (optional) for an MSM series AC.
To export authorized APs:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > WIDS Management > WIDS Config.
The ACs list displays all managed ACs in WSM.
3. Do one of the following:
{
Select one or more ACs, and the click Export Authorized AP in the ACs list area.
{
Click the Operation icon for an AC, and the select Export Authorized AP List from the
shortcut menu.
The Options of Exporting Authorized AP window appears.
4. Select the type of APs you want to export. Options are Management AP and Manually
Authorized AP.
{
Management AP—Export fit APs managed by the AC.
{
Manually Authorized AP—Export manually authorized APs.
For an MSM series AC, if you do not select either of the two options, only external APs are
exported.
For a Comware-based AC, you can export only management fit APs.
5. Click Export.
The page for downloading the exported template file appears.
6. Click Export Result to save or open the authorized AP list.
Importing authorized APs
You can import an authorized AP list from a .csv file for a single AC or multiple ACs. An authorized
AP list presents a list of APs by MAC addresses. An AC matches the MAC address of a detected
rogue AP with the MAC addresses in the authorized AP list. If there is a match, the AC classifies the
detected rogue AP as an authorized AP.