H3C Technologies H3C Intelligent Management Center - Manual (Page 509)

487
Detected SSIDs
The sensors scan the channels supported by the country code, and collect statistics on the SSIDs being
used on the channels.
Viewing the detected SSID list
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > SSIDs Detected from the navigation tree.
The Detected SSID List displays all detected SSIDs.
Detected SSID List
{
Status—State of the SSID, Inactive or Active. An active SSID becomes inactive if no frames
carrying the SSID are transmitted within the specified time period. An inactive SSID is
deleted from the Detected SSID List after its lifetime exceeds the specified aging time.
{
SSID—Click the SSID to view its details.
{
Virtual Security Domain—Virtual security domain to which the sensor that detected the SSID
belongs.
{
Hide SSID—Whether or not the SSID is hidden in the beacon frames sent by the APs.
{
AP Count—Number of APs using the SSID.
{
Detecting AC—Device label of the AC with which the sensor that detected the SSID is
associated. Click the label to view the AC details.
{
Last Detection Time—Time when the SSID was last detected.
If the Detected SSID List contains enough entries, the following navigational aids appear:
{
Click to page forward in the Detected SSID List.
{
Click to page forward to the end of the Detected SSID List.
{
Click to page backward in the Detected SSID List.
{
Click to page backward to the front of the Detected SSID List.
3. Click 8, 15, 50, 100, or 200 on the right side of the main pane to specify the number of items
you want to display on each page.
NOTE:
You can sort the Detected SSID List by the SSID, AP Count, and Detected AC fields. Click the column
label to sort the list by the selected field. The column label allows you to toggle between the various sort
options specific to each field.
Synchronizing detected SSIDs
By default, IMC synchronizes the SSIDs detected by WIPS from managed ACs every 2 hours. You can
also manually perform the synchronization operation.
To manually synchronize SSIDs from the ACs:
1. Click the Service tab.