H3C Technologies H3C Intelligent Management Center - Manual (Page 330)

308
Adding client information
This function helps you manually add client information:
To add client information:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Clients.
The Clients page displays all clients.
3. Click Client Info Management.
All client information is displayed on the client information list.
4. Click Add.
The page for adding client information appears.
5. Set the following parameters as needed:
{
MAC Address—Enter the MAC address of the client, which must be unique in WSM.
{
Username—Enter the name of the client.
{
Account Name—Enter the account name.
{
Endpoint Type—Enter the endpoint type, such as Mobile and iPhone.
{
Vendor—Enter the endpoint vendor.
{
OS—Enter the operating system used by the endpoint.
{
Client ID—Enter the ID of the client.
{
Address—Enter the contact address of the client.
{
Email—Enter the email of the client. The valid email address format is
[email protected].
{
Tel—Enter the telephone number of the client.
6. Click OK.
Importing client information
This function helps you import client information to WSM through a text file. The text file must meet the
following requirements:
• It must be a .csv or .txt file and its size cannot exceed 5 MB.
• Each line in the file has the same number of columns.
• If space is used as the delimiter between columns, only one space is allowed between two
columns. Enter more spaces might cause import failure.
To import client information:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Clients.
The Clients page displays all clients.
3. Click Client Info Management.
All client information is displayed on the client information list.
4. Click Import.