H3C Technologies H3C Intelligent Management Center - Manual (Page 275)

253
{
Rx FCS Errors—Number of MPDUs, considered to be destined for this wireless client (address
matches), received with an FCS error. Note that this does not include data received with an
incorrect CRC in the PLCP header. These are not considered to be MPDUs.
• Quality of Service List
Quality of service statistics are not available for MSM devices running software version 5.3.x.
{
Very High Priority Tx Packets—Total number of QoS very high priority packets sent.
{
QoS High Priority Tx Packets—Total number of QoS high priority packets sent.
{
QoS Medium Priority Tx Packets—Total number of QoS medium priority packets sent.
{
QoS Low Priority Tx Packets—Total number of QoS low priority packets sent.
5. Click Close.
Viewing fit AP history information
The history information of MSM series fit APs includes online client count, rate, traffic, and connectivity
history information. For more information, see "
Viewing fit AP history information ."
General management functions
Ping
This function allows you to test the reachability of a managed fit AP from the IMC server.
To ping the selected fit AP from the Fit AP List page:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fit APs.
The Fit AP List page displays all fit APs.
3. Click the Operation icon for the fit AP you want to ping.
4. Select Ping from the menu.
The Ping dialog box appears.
5. From the Buffer Size list, select the ping packet size in bytes.
6. From the Number list, select the number of ping packets you want IMC to send to the selected
fit AP.
7. Click OK to accept your changes and start the ping test.
View the results of your ping test in the Ping dialog box.
8. Click OK.
Traceroute
This function allows you to test the reachability of a managed fit AP from the IMC server, and to
troubleshoot and locate connectivity problems.
To perform a traceroute to the selected fit AP from the Fit AP List page:
1. Click the Service tab.