H3C Technologies H3C Intelligent Management Center - Manual (Page 213)

191
Synchronizing fat APs
WSM allows you to synchronize fat AP configuration automatically or manually. By default, IMC
automatically synchronizes fat APs every 2 hours.
For more information, see using batch mode to configure polling interval in the H3C IMC Base
Platform Administrator Guide. You can also manually synchronize fat APs as needed.
To manually synchronize fat APs:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fat APs. The Fat
AP List page displays all fat APs.
3. Select the fat APs you want to synchronize.
4. Click Synchronize to start synchronizing the selected fat APs.
The page is refreshed to display the most recent fat AP information after the process is complete.
Exporting fat APs
WSM allows you to export all fat APs in the fat AP list to a .csv file, which is saved on your local
computer.
To export all fat APs:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fat APs. The Fat
AP List page displays all fat APs.
3. Click Export All.
4. Click Export Result to download, and save the exported file to your local computer.
Viewing detailed information about a radio on a
fat AP
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fat APs. The Fat
AP List page displays all fat APs.
3. Click the device label of an MSM series fat AP to enter the Fat AP Details page.
4. Click the Wireless Service Information tab.
All wireless service information for the selected fat AP is displayed in this tab.
5. On the radio list, click the ID of the radio whose detailed information you want to view.
A page appears, displaying detailed radio information.
Fat AP Radio Details contents
Basic Information
{
Radio ID—ID of the radio.
{
Status—Administrative state of the radio: UP or Down.