Configuring global ap parameters, Configuring the country/region code for an ac, Synchronizing acs – H3C Technologies H3C Intelligent Management Center User Manual
Page 94
72
11.
Click OK.
The operation result page appears, displaying the configuration result of each radio.
12.
To return to the Radio Batch Configuration page, click Back.
Configuring global AP parameters
WSM enable you to configure global radio parameters for AP models supported by an AC. The
global parameters can be inherited by fit AP groups on the AC.
To configure global AP parameters for an AC:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
3.
Click the Operation icon
for an AC.
4.
Select Global AP Parameter Config. from the menu
The AP Model List displays all the AP models supported by the AC, and the basic information
about the radios for the AP model, including the radio type and operating mode.
5.
Click an AP model link.
The page for configuring radio parameters for the AP model appears.
6.
Configure the radio parameters as needed.
For information about configuring radio parameters, see "
Configuring the country/region code for an AC
WSM enables you to configure the country/region code for an AC, which can be inherited by groups
on the AC.
The country/region code of a fit AP determines which channels are available for the radios on the fit
AP.
To configure the country/region code for an AC:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
3.
Click the Operation icon
for an AC.
4.
Select Configure AC Global Country/Region Code from the menu.
The Modify Country/Region Code for The HP AC page appears.
5.
Select the country/region code for the AC from the Country/Region Code list.
6.
Click OK.
Synchronizing ACs
WSM supports synchronizing AC configuration automatically or manually. By default, IMC
automatically synchronizes ACs every 2 hours (see H3C IMC Base Platform Administrator Guide). You
can also manually synchronize ACs as needed.