H3C Technologies H3C Intelligent Management Center - Manual (Page 75)

53
{
IP Address—Enter a partial or complete IPv4 address of the AC. WSM supports fuzzy
matching for this field.
{
Device Status—Select a device state for the AC. Options are:
− Unlimited
− Critical
− Major
− Minor
− Warning
− Normal
− Unmanaged
− Unknown.
{
Connectivity Status—Select a connectivity state for the AC. Options are Unlimited,
Reachable, and Unreachable.
{
Vendor—Select the vendor of the AC. Options are Unlimited, H3C, HP, Cisco, and Aruba.
An empty field or a field that is set to Unlimited does not serve as a query criterion.
c. Click Query.
The AC List displays all ACs matching the query criteria.
d. Click Reset to clear the query criteria and display all ACs.
Viewing detailed information about an AC
1. Click the Service tab.
From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
2. Click the device label of the AC whose detailed information you want to view.
The AC details page appears.
This information only describes the wireless service information about the AC. For other
information displayed on the AC details page, see H3C IMC Base Platform Administrator
Guide.
3. Click the Wireless Service Information tab.
All of the wireless service information for the AC is displayed in this tab.
AP Information
{
Online Fit APs—Number of online fit APs managed by the AC. Click the number to view the
list of the online fit APs.
{
Offline Fit APs—Number of offline fit APs managed by the AC. Click the number to view the
list of the offline fit APs.
Client Information
{
Online Clients—Number of clients that are associated with the fit APs managed by the AC.
Click the number to view the list of the online clients.
Team Information
This area appears only when the selected AC is a team AC.