H3C Technologies H3C Intelligent Management Center - Manual (Page 103)

81
IMPORTANT:
The Operation menu content for a Comware-based AC are different from that of an MSM
series AC.
If the AC List contains enough entries, the following navigational aids are displayed.
• Click the Next Page icon to page forward in the AC List.
• Click the Last Page icon to page forward to the end of the AC List.
• Click the Previous Page icon to page backward in the AC List.
• Click the First Page icon to page backward to the front of the AC List.
To configure the number of items per page you want to display, click 8, 15, 50, 100, or 200 at the
upper right of the AC List.
NOTE:
You can sort the AC List by every field except the Operation field. The column label allows you to
toggle between the various sort options specific to each field. Click the column label to sort the list by
the selected field.
Synchronizing ACs
WSM supports synchronizing AC configuration automatically or manually. By default, IMC
automatically synchronizes ACs every 2 hours (see H3C IMC Base Platform Administrator Guide). You
can also manually synchronize ACs as needed.
To manually synchronize ACs:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
The AC List page displays all ACs.
3. Select the ACs you want to synchronize.
4. Click Synchronize to start synchronizing the selected ACs. The synchronization process takes
several minutes. To view the last synchronization time and synchronization results, refresh the
page or enter the page again after synchronization is complete.
Querying ACs
WSM provides basic query and advanced query. Basic query criteria include several key parameters
for quick search. Advanced query offers various query criteria for precise match.
For more information, see "
Querying ACs ."
Viewing detailed information about an AC
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.