H3C Technologies H3C Intelligent Management Center - Manual (Page 359)

337
• access interface
• collect time.
To view fat AP access ports:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > AP Access Ports.
The AP Access Ports page appears.
3. Click the Fat AP tab.
The Device List page displays all fat AP access ports and the related fat AP information.
Device List contents
{
Status—Displays the connectivity between the fat AP and the access device, and the PoE
status of the access device.
− The Direct Link icon indicates that the fat AP is directly connected to the access
device.
− The Indirect Link icon indicates that the fat AP is directly or indirectly connected to
the access device.
− The PoE Enable icon indicates that the AP access port is enabled with PoE.
− The PoE Disable icon indicates that the AP access port is disabled with PoE.
WSM displays the PoE status of AP access ports only when the access device supports PoE
and is directly connected to the fat AP.
{
Device Label—Label of the fat AP. Click the name to view its details.
{
SN—Serial number of the fat AP.
{
IP Address—IPv4 address of the fat AP.
{
MAC Address—MAC address of the fat AP.
{
Access Device—Label of the access device to which the fat AP is connected. Click the label
to view its details.
{
Access Interface—Name of the AP access port that connects the access device to the fat AP.
{
Collect Time—Collect Time—Time when IMC last collected data through the AP access port
that is connected to the fat AP.
{
Operation—Click the Operation icon for the fat AP to display the Operation menu. The
icon appears only when the fat AP is directly connected to the access device.
From the Operation menu, you can enable or disable the PoE function on a fat AP access
port. For more information, see "
Configuring PoE on a fat AP access port ."
If the Device List contains enough entries, the following navigational aids are displayed:
• Click the Next Page icon to page forward in the Device List.
• Click the Last Page icon to page forward to the end of the Device List.
• Click the Previous Page icon to page backward in the Device List.
• Click the First Page icon to page backward to the front of the Device List.
Click 8, 15, 50, 100, or 200 on the upper right of the Device List to specify the number of items you
want to display on each page.