H3C Technologies H3C Intelligent Management Center - Manual (Page 432)

410
4. Click OK.
The Remove from Attack List Result page appears.
{
MAC Address—MAC address of the AP.
{
AC—Label of the AC that manages the AP.
{
Result—Operation result.
Adding Comware-based rogue APs to the permitted-MAC
address list
You can allow a Comware-based rogue AP to provide wireless network service by adding it to the
permitted-MAC address list.
The feature is available only for Comware-based rogue APs.
Adding a Comware-based rogue AP to the permitted-MAC address list
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > WIDS Management > Rogue APs.
3. Use either of the following methods to add a rogue AP to the permitted-MAC address list:
a. Click the icon in the Operation field, and then click the Add to Permit List link.
b. Click the MAC address link of the rogue AP, and then click the Add to Permit List link in the
Action area to the right of the page.
4. Click OK.
Adding Comware-based rogue APs to the permitted-MAC address list in batches
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > WIDS Management > Rogue APs.
3. Select one or more rogue APs, and click Add to Permit List.
A confirmation dialog box appears.
4. Click OK.
The Add to Permit List Result page appears.
{
MAC Address—MAC address of the AP.
{
AC—Label of the AC that manages the AP.
{
Result—Operation result.
A rogue AP on the MAC-to-attack list cannot be added to the permitted-MAC address list.
Adding a rogue AP to the permitted-MAC address list removes it from the rogue AP list.
For more information about how to remove an AP from the permitted-MAC address list, see
" Maintaining the permitted-MAC address list of an AC ."
Locating a rogue AP
You can locate a rogue AP on the location view.
To locate a rogue AP:
1. Click the Service tab.