H3C Technologies H3C Intelligent Management Center - Manual (Page 448)

426
Importing alarm-ignored MAC addresses
WIPS supports importing MAC addresses to the alarm-ignored address list in batches. Only .csv files
are supported. The files can contain only MAC addresses, and do not require any row heading or
line heading.
To import alarm-ignored MAC addresses:
1. Access the WIPS Management page.
2. Click the Alarm-Ignored Address List tab.
3. Click Import.
The Select File page appears.
4. Click Browse or the field to select a file.
5. Click Next.
The Import MAC Address Information page appears, displaying the following information:
{
MAC Address—MAC address of the device.
{
Vendor—Vendor of the device or NIC. IMC uses the MAC address to identify the vendor of
the device or NIC. If the MAC address is not an OUI MAC address or a legal MAC address,
the field displays Unknown.
If you do not want to import certain MAC addresses, select them and click Delete.
6. Click OK.
The Imported MAC Address Result page appears, displaying the result for importing MAC
address information.
7. Click OK.
Deleting alarm-ignored MAC addresses
This function enables you to delete one or more MAC addresses from the alarm-ignored address list.
To delete alarm-ignored MAC addresses:
1. Access the WIPS Management page.
2. Click the Alarm-Ignored Address List tab.
3. Delete a single MAC address or multiple MAC addresses in batches:
{
Select the MAC addresses you want to delete, and click Delete.
{
Click the Delete icon for the MAC address you want to delete.
A confirmation dialog box appears.
4. Click OK.
Configuring the static blocked address list
The static blocked address list contains the MAC addresses of all manually configured rogue devices.
Viewing the static blocked address list
1. Access the WIPS Management page.
2. Click the Static Blocked Address List tab.
The static blocked address list displays all blocked MAC addresses.
{
MAC Address—MAC address of the device.