H3C Technologies H3C Intelligent Management Center - Manual (Page 136)

114
Click 8, 15, 50, 100, or 200 at the upper right of the Load Balance Group List to configure the
number of items per page you want to display.
NOTE:
You can sort the Load Balance Group List by the ID field. Click the column label to sort the list by the
selected field. The column label allows you to toggle between the various sort options specific to each
field.
Adding a load balancing group
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
3. Click the device label of the target AC.
4. Click the Load Balance Group link in the AC Configuration area to the right of the page. All
load balancing group information of the AC is displayed in the Load Balance Group List.
5. Click Add. The page for adding a load balancing group appears.
6. Set the following parameters as needed:
{
ID—Enter the ID of the load balancing group.
{
Description—Enter a description for the load balancing group.
7. Click OK.
Modifying a load balancing group
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
3. Click the device label of the target AC.
4. Click the Load Balance Group link in the AC Configuration area to the right of the page. All the
load balancing group information of the AC is displayed in the Load Balance Group List.
5. Click the Modify icon for the load balancing group you want to modify.
The page for modifying a load balancing group appears.
6. Modify the following parameters as needed:
{
ID—It cannot be modified.
{
Description—Enter a description for the load balancing group.
7. Click OK.
Deleting a load balancing group
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
3. Click the device label of the target AC.