H3C Technologies H3C Intelligent Management Center - Manual (Page 534)

512
− 802.11an
− 802.11gn
{
Analysis Status—Spectrum analysis status of the radio.
{
FFT State—FFT enable status of the radio.
{
Channels to Monitor—Channels monitored by the radio. For the 2.4 GHz band, the radio
can monitor channels 1 to 14. For the 5 GHz band, the radio can monitor channels 36 to
64, 100 to 140, and 149 to 165.
{
Location—Name of the location view of the AP to which the radio belongs. Click the name
of the location view to view the topology.
{
AC—Name of the AC with which the AP (to which the radio belongs) is associated. Click the
name of the AC to view its details.
{
Operation—Click the Operation icon to view the spectrum analysis information that the
radio detected.
From the
Operation menu, you can select Spectrum Analysis Monitor and Spectrum
Analysis Monitor History.
If the Radio List contains enough entries, the following navigational aids are displayed.
{
Click the Next Page icon to page forward in the Radio List.
{
Click the Last Page icon to page forward to the end of the Radio List.
{
Click the Previous Page icon to page backward in the Radio List.
{
Click the First Page icon to page backward to the front of the Radio List.
Click 8, 15, 50, 100, or 200 on the upper right of the Radio List to specify the number of items
you want to display on each page.
NOTE:
You can sort the Radio List by every field except the Operation field. Click the column label to sort the
list by the selected field. The column label allows you to toggle between the various sort options specific
to each field.
Querying radios
WSM provides basic query and advanced query. Basic query criteria include several key parameters
for quick search. Advanced query offers various query criteria for precise match.
To query radios:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Spectrum Guard > Radio Config.
The Radio Config page appears.
3. Perform a basic query:
a. Enter the device label (case-insensitive) of the AP. WSM supports fuzzy matching for this
field.
b. Click the Query icon . The Radio Config page displays all APs matching the query
criteria.
4. Clear the Query field, and click the Query icon to display all APs.