H3C Technologies H3C Intelligent Management Center - Manual (Page 280)

258
{
Respond to Broadcast Probes—Whether the fit AP responds to the broadcasts sent by clients.
{
Connection Priority—Connection priority of the fit AP. If multiple ACs are available, the fit AP
connects to the AC with the highest connection priority. The value range is 0 to 7. A greater
value represents a high priority.
{
Client Idle-Timeout Interval (s)—Maximum interval for which the link between the fit AP and
a client can be idle. If the fit AP does not receive any frame sent by the client within the
maximum interval, the AC terminates the connection between the fit AP and the client.
{
Client Keep-Alive Interval (s)—Client keep alive interval. The keep-alive mechanism is used to
detect clients segregated from the system. The fit AP sends probe requests to a client. If the fit
AP cannot receive any response, the AC terminates the connection between the fit AP and
the client.
{
Flash Free (Bytes)—Free memory of the flash on the fit AP.
{
Enable Mesh Portal Service—Whether mesh portal service is enabled on the fit AP. Yes
means mesh portal service is enabled and the fit AP can operate as an MPP in a mesh
network. No means mesh port service is not enabled.
{
Whether it is an engineered Fit AP—Whether the fit AP is an engineered fit AP. An
engineered fit AP is a fit AP that has been installed but in debugging state.
Client Statistics
{
Online Clients—Number of clients that have associated with the fit AP. Click the number to
view all the online clients.
{
Associated Clients—Number of successful associations between clients and the fit AP.
{
Associated Failures—Number of failed associations between clients and the fit AP.
{
Denied Registered Clients—Number of rejected associations between clients and the fit AP.
{
Re-associated Clients—Number of reassociations between clients and the fit AP.
{
Exceptional Deauthenticated Clients—Number of exceptional deassociations between clients
and the fit AP.
Wireless Service
{
BSSID—BSSID for the fit AP, represented by the MAC address of the fit AP.
{
Radio ID—ID of the radio on the fit AP. Click the ID link to view detailed radio information.
{
Service Policy SSID—SSID corresponding to the service policy bound to the radio on the fit
AP. Click the name link to view its details.
{
VLAN ID—VLAN ID configured in the service policy bound to the current radio.
Radios
{
ID—ID of the radio. Click the ID link to view its details.
{
Radio Type—Select the type of the radio. Options are:
− 802.11a
− 802.11b
− 802.11g
− 802.11bg
− 802.11at
− 802.11an
− 802.11gn
− 802.11n (2.4GHz)