H3C Technologies H3C Intelligent Management Center - Manual (Page 84)

62
Viewing WLANs on an AC
1. Click the Service tab.
From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
2. Click the Operation icon for the target AC.
3. Select WLAN Configuration from the menu.
The WLAN List displays all WLANs on the AC.
WLAN List
{
SSID—SSID of the WLAN. Click the SSID of a WLAN to view its details.
{
VSC Name—Name of the VSC.
{
Enable Status—State of the WLAN, Enable or Disable. A WLAN can be used by radios only
when it is in Enable state.
{
Broadcast SSID—Select whether to enable fit APs in groups bound with the WLAN to
broadcast the SSID in beacon frames.
{
Encryption Mode—Encryption mode used by the WLAN. Options are:
− None
− Static WEP
− Dynamic WEP
− WPA Pre-Shared Key
− WPA 802.1X
{
Authentication Mode—Authentication mode used by the WLAN. Options are:
− None
− HTML Authentication,
− 802.1X Authentication
− MAC Authentication
To configure this parameter, you must log in to the web manager of the AC.
{
VLAN ID—VLAN ID bound to the WLAN. Clients that access the WLAN are added
automatically to the bound VLAN.
{
Operation—Click the Operation icon for the WLAN to display the operation menu.
From the Operation menu, you can modify and delete the specified WLAN, and bind
the WLAN to fit AP groups.
If the WLAN List contains enough entries, the following navigational aids are displayed.
Navigating the WLAN List
• Click the Next Page icon to page forward in the WLAN List.
• Click the Last Page icon to page forward to the end of the WLAN List.
• Click the Previous Page icon to page backward in the WLAN List.
• Click the First Page icon to page backward to the front of the WLAN List.
Click 8, 15, 50, 100, or 200 at the upper right of the WLAN List to specify the number of items you
want to display on each page.