H3C Technologies H3C Intelligent Management Center - Manual (Page 115)

93
− 802.11n (2.4GHz)
− 802.11bgn
− 802.11n
− 802.11n (5GHz)
{
Max Transmission Power (dBm)—Enter the maximum transmit power of the radio.
{
Admin Status—Select an administrative state for the radio. Options are Up and Down.
{
Channels in Use—Select the working channel of the radio. The value range depends on the
radio type. If you select Auto, the AC assigns an optimum channel to the radio.
{
Preamble Type—Select the preamble type for the fit AP. Options are Short and Long. Short
means the fit AP transmits frames with either a short preamble or long preamble. Long
means the fit AP only transmits frames with a long preamble. You can configure this option if
you select the 802.11b, 802.11g, and 802.11gn radio type.
{
Radio Policy—Select a radio policy to be bound to the radio. Options are all existing radio
policies in WSM.
{
Synchronize AC Configuration—Synchronize the global configuration to other ACs in the AC
group to which the current AC belongs. To apply the global configuration only to the current
AC, do not select this option. This option is available only when the AC belongs to at least
one AC group.
6. Click Add in the Radio List area.
The Select Device dialog box appears.
7. Enter or select one or more of the following query criteria to search for the radios you want to
configure:
{
AP Label—Enter the label of the fit AP to which the radio belongs. WSM supports fuzzy
matching for this field.
{
AP Name—Enter the name of the fit AP to which the radio belongs. WSM supports fuzzy
matching for this field
{
Serial Number—Enter the serial number of the fit AP to which the radio belongs. WSM
supports fuzzy matching for this field
{
Radio Type—Select a radio type. Options are 802.11a, 802.11b, 802.11g, 802.11gn, and
802.11an.
{
Admin Status—Select an administrative state for the radio. Options are Unlimited, Up, and
Down.
{
Radio Policy Name—Enter the name of the radio policy bound to the radio. WSM supports
fuzzy matching for this field.
{
Location—Enter or select the name of the location view to which the fit AP belongs. WSM
supports fuzzy matching for this field.
An empty field or a field that is set to Unlimited does not serve as a query criterion.
8. Click Query. The Radio List displays all radios matching the query criteria. Click Reset to clear
the query criteria and display all radios.
9. Select the radios you want to configure.
10. Click OK to close the Select Device window.
The Radio List displays all selected radios.
11. Click OK.
The Result List page appears, displaying the configuration result of each radio.