H3C Technologies H3C Intelligent Management Center - Manual (Page 302)

280
Modifying extended properties for a fit AP
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fit APs.
The Fit AP List page displays all fit APs.
3. Click the device label of the target fit AP.
4. Click the Modify icon for the extended properties.
The Modify Extended Properties page displays all extended properties that have been defined.
5. Modify the extended properties, as needed.
6. Click OK.
Importing extended properties in batches
This function enables you to import extended properties for fit APs in batches. WSM uses the IP
addresses of extended properties as keywords. Only .csv files are supported, and each line in a .csv
file must have the same number of columns. WSM considers the first line as the column name and
does not import this line.
To import extended properties in batches:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fit APs.
The Fit AP List page displays all fit APs.
3. Click Import.
4. Click Browse to select a file, or enter the URL of the file to be imported.
5. Click Next.
The Import Information page appears.
6. The extended properties can either be read from the imported file or specified manually. You
can select the specified column number in the file as an extended property, or select Not select
in the file and enter an extended property.
7. Click Preview.
A dialog box appears. Operators can preview the imported information. The Not Imported
extended property is not displayed.
8. Click Cancel to close the dialog box.
9. Click OK.
The Import Result displays the result for importing extended properties for each fit AP.
General management functions
Ping
This function allows you to test the reachability of a managed fit AP from the IMC server.
To ping the selected fit AP from the Fit AP List page: