H3C Technologies H3C Intelligent Management Center - Manual (Page 281)

259
− 802.11bgn
− 802.11n
− 802.11n (5GHz)
{
Channel—Working channel of the radio. The value range depends on the radio type. If the
field displays Auto, the fit AP evaluates the channel quality and selects an optimum channel
as the working channel.
{
Current Transmission Power (dBm)—Current transmission power of the radio.
{
Admin Status—Administrative state for the radio. Options are Up and Down.
{
Operation Status—Current state of the radio. Options are Up and Down.
{
Operation—Provides the Modify and Configure Mesh Peer MAC Address options.
Operators can click the Modify icon to modify radio parameters and the Configure Mesh
Peer MAC Address icon to configure neighbor MAC addresses for a fit AP. For more
information, see " Modifying radio parameters for a fit AP " and " Configuring a mesh peer
MAC address for a fat AP ."
X-Share Antenna
{
Antenna ID—ID of the antenna.
{
Radio—Radio ID of the antenna.
{
Attenuation—Attenuation value of the antenna.
{
Description—Description for the antenna.
{
Modify—Click the Modify icon to modify parameters for the antenna. See " Modifying
parameters for an X-share antenna ."
Neighbour
A fit AP automatically scans for neighbor APs when its work mode is set to Monitor or Hybrid, and
displays the discovered neighbor fit APs in the Neighbour list.
{
Radio ID—ID of the radio on the neighbor fit AP.
{
MAC Address—BSSID of the service policy bound to the radio.
{
AP Label—Device label of the neighbor AP.
{
Channel—Working channel of the radio.
{
Interference (%)—Interface rate of the channel.
{
Signal Strength (dBm)—Signal strength of the radio.
Managing fit AP templates
To manage a fit AP through an AC, you must create a fit AP template for the fit AP on the AC.
When a fit AP attempts to associate with the AC, the AC compares the serial number of the fit AP with
those of its fit AP templates.
If a match is found, the AC accepts the association request of the fit AP and manages the fit AP. If no
match is found, the AC denies the association request of the fit AP.
You can view the fit AP/fit AP template list; add, modify, and delete a fit AP template; import fit AP
templates; export fit AP templates; restart a fit AP; and synchronize fit AP labels.