H3C Technologies H3C Intelligent Management Center - Manual (Page 486)

464
6. Clear the Query field, and click the Query icon to display all virtual security domains.
To perform an advanced query:
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Virtual Security Domain from the navigation tree.
3. Click the Virtual Security Domain tab.
The virtual security domain list displays all virtual security domains.
4. Click the Advanced icon to the right of the query field.
5. Set the query criteria:
{
Name—Enter the virtual security domain name.
{
AC—Select the AC where the security domain is configured. If you select All, this field does
not serve as a query criterion.
6. Click the Query icon . The virtual security domain list displays all virtual security domains
matching the query criteria.
7. Clear the Query field, and click the Query icon to display all virtual security domains.
Adding a virtual security domain
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Virtual Security Domain from the navigation tree.
3. Click the Virtual Security Domain tab.
The virtual security domain list displays all virtual security domains.
4. Click Add.
The Add Virtual Security Domain page appears.
5. Configure the following parameters for the virtual security domain:
{
Name—Enter the name of the virtual security domain, a string of 1 to 32 characters. Valid
characters include integers, letters, and underscores (_).
{
AC—Select the AC to which the virtual security domain is deployed.
{
Attack Detection Policy—Select an attack detection policy. One virtual security domain can
include only one attack detection policy. A virtual security domain is bound to the default
attack detection policy by default.
{
Countermeasure Policy—Select a countermeasure policy. A virtual security domain is bound
to the default countermeasure policy by default.
{
Signature Policy—Select a signature policy. A virtual security domain is bound to the default
signature policy by default.
6. Bind AP categorization rules to the virtual security domain:
a. In the AP Categorization Rule area, click Select.
The AP Categorization Rule window appears.
b. Select one or more AP categorization rules.
c. Click OK.
The selected AP categorization rules appear in the AP Categorization Rule List.
− Name—Name of the AP categorization rule.
− Threat Level—Threat level of the AP categorization rule. If no threat level is configured,
the field displays
.