H3C Technologies H3C Intelligent Management Center - Manual (Page 469)

447
3. Click the Signature Policy tab.
The signature policy list displays all signature policies.
4. Click Synchronize to start synchronizing the signature policy list.
The page is refreshed to display the most recent data after the synchronization process is completed.
Querying signature policies
To perform a basic query:
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Virtual Security Domain from the navigation tree.
3. Click the Signature Policy tab.
The signature policy list displays all signature policies.
4. Enter a partial or complete name of the signature policy in the query field on the upper right
corner.
5. Click the Query icon . The signature policy list displays all signature policies matching the
query criteria.
6. Clear the Query field, and click the Query icon to display all signature policies.
To perform an advanced query:
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Virtual Security Domain from the navigation tree.
3. Click the Signature Policy tab.
The signature policy list displays all signature policies.
4. Click the Advanced icon to the right of the query field. This operation also clears the query
field.
5. Set the query criteria:
{
Policy Name—Enter a partial or complete signature policy name.
{
AC—Select the AC where the signature policy is configured. If you select All, this field does
not serve as a query criterion.
6. Click Query.
The Signature Policy list displays all signature policies matching the query criteria.
7. Click Reset to clear the query criteria and display all signature policies.
Adding a signature policy
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Virtual Security Domain from the navigation tree.
3. Click the Signature Policy tab.
The signature policy list displays all signature policies.
4. Click Add.
5. Configure the basic information:
{
Policy Name—Enter the signature policy name, a string of 1 to 32 characters. The string can
only contain letters, digits, and underlines.
{
AC—Select an AC where the signature policy is to be created.
6. Select signature rules for the signature policy, and modify the priority of the signature rules.