Configuring the static trusted oui list, Viewing the static trusted oui list, Synchronizing the static trusted oui list – H3C Technologies H3C Intelligent Management Center User Manual
Page 453: Querying ouis

431
{
Select the MAC addresses you want to delete, and click Delete.
{
Click the Delete icon for the MAC address you want to delete.
A confirmation dialog box appears.
4.
Click OK.
Configuring the static trusted OUI list
All MAC addresses in the static trusted OUI list are considered as trusted MAC addresses.
Viewing the static trusted OUI list
1.
Access the WIPS Management page.
2.
Click the Static Trusted OUI List tab.
The static trusted OUI list displays all trusted OUIs.
{
OUI—OUI, in the format of xx:xx:xx.
{
Vendor—Vendor to which the OUI belongs.
{
Delete—Allows you to delete the OUI.
If the static trusted OUI list contains enough entries, the following navigational aids are
displayed:
{
Click the Next Page icon
to page forward in the static trusted OUI list.
{
Click the Last Page icon
to page forward to the end of the static trusted OUI list.
{
Click the Previous Page icon
to page backward in the static trusted OUI list.
{
Click the First Page icon
to page backward to the front of the static trusted OUI list.
Click 8, 15, 50, 100, or 200 at the upper right of the static trusted OUI list to specify the
number of items you want to display on each page.
NOTE:
You can sort the static trusted OUI list by the OUI and Vendor fields. Click the column label to sort the
list by the selected field. The column label allows you to toggle between the sort options specific to each
field.
Synchronizing the static trusted OUI list
IMC supports synchronizing the static trusted OUI list automatically or manually. By default, IMC
automatically synchronizes the static trusted OUI list every 2 hours
To manually synchronize the static trusted OUI list:
1.
Access the WIPS Management page.
2.
Click the Static Trusted OUI List tab.
3.
Click Synchronize to start synchronizing the static trusted OUI list.
The page is refreshed to display the most recent data after the synchronization process is completed.
Querying OUIs
1.
Access the WIPS Management page.
2.
Click the Static Trusted OUI List tab.