H3C Technologies H3C Intelligent Management Center - Manual (Page 196)

174
{
SSID—Enter the SSID of the WLAN. WSM supports fuzzy matching for this field.
{
Device Status—Select a device state for the fat AP. Options are:
− Unlimited
− Critical, Major
− Minor
− Warning
− Normal
− Unmanaged
− Unknown
{
Connectivity Status—Select a connectivity state for the fat AP. Options are Unlimited,
Reachable, and Unreachable.
{
Vendor—Select the vendor of the fat AP. Options are Unlimited, H3C, HP, and Cisco.
{
Location—Enter or select the name of the location view to which the fat AP belongs. WSM
supports fuzzy matching for this field.
An empty field or a field that is set to Unlimited does not serve as a query criterion.
c. Click Query.
The Fat AP List displays all fat APs matching the query criteria.
d. Click Reset to clear the query criteria and display all fat APs.
Viewing detailed information about a fat AP
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fat APs.
The Fat AP List page displays all fat APs.
3. Click the device label of the MSM series fat AP whose detailed information you want to view.
The fat AP details page appears.
This information only describes the wireless service information about the fat AP. For other
information displayed on the fat AP details page, see H3C IMC Base Platform Administrator
Guide.
4. Click the Wireless Service Information tab.
All wireless service information for the fat AP is displayed.
Client Information
{
Online Clients—Number of clients that are associated with the fat APs. Click the number to
view all online clients.
Radio Information
This area lists the radio information for the selected fat AP.
{
ID—ID of the radio. Click the ID to view the radio details.
{
Interface—Interface of the radio on the fat AP.
{
Radio Type—These are the radio types:
− 802.11a
− 802.11b