H3C Technologies H3C Intelligent Management Center - Manual (Page 144)

122
− 802.11an
{
Delete—Click the Delete icon to delete the radio.
If the RRM calibration group Radio List contains enough entries, the following navigational aids are
displayed.
Navigating the RRM Calibration Group Radio List
• Click the Next Page icon to page forward in the RRM Calibration Group Radio List.
• Click the Last Page icon to page forward to the end of the RRM Calibration Group Radio List.
• Click the Previous Page icon to page backward in the RRM Calibration Group Radio List.
• Click the First Page icon to page backward to the front of the RRM Calibration Group Radio
List.
Click 8, 15, 50, 100, or 200 at the upper right of the RRM Calibration Group Radio List to configure
the number of items per page you want to display.
Adding radios to an RRM calibration group
Radios added to an RRM calibration group belong to the fit APs managed by the same AC.
To add radios to an RRM calibration group:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
3. Click the device label of the target AC.
4. Click the RRM Calibration Group link in the RRM Management area to the right of the page. All
the RRM calibration group information of the AC is displayed in the RRM Calibration Group List.
5. Click the ID of the RRM calibration group to which you want to add radios. Information about
all radios in the RRM calibration group is displayed in the Radio List of RRM Calibration Group.
6. Click Add in the Radio List of the RRM area.
The Select Device dialog box appears.
7. Enter or select one or more of the following query criteria to search for the radios you want to
configure:
{
AP Label—Enter the label of the fit AP to which the radio belongs. WSM supports fuzzy
matching for this field
{
AP Name—Enter the name of the fit AP to which the radio belongs. WSM supports fuzzy
matching for this field.
{
Serial Number—Enter the serial number of the fit AP to which the radio belongs. WSM
supports fuzzy matching for this field.
{
Radio Type—Select a radio type. Options are:
− 802.11a
− 802.11b
− 802.11g
− 802.11gn
− 802.11an
{
Admin Status—Select an administrative state for the radio. Options are Up and Down.