H3C Technologies H3C Intelligent Management Center - Manual (Page 491)

469
Synchronizing trusted addresses
By default, IMC synchronizes static trusted address list from managed ACs every 2 hours. You can
also manually perform the synchronization operation.
To manually synchronize the static trusted address list from managed ACs:
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Dynamic Detection Information from the
navigation tree.
3. Click the Trusted Address List tab.
The Trusted Address List displays the MAC addresses of all trusted APs and clients.
4. Click Synchronize.
The page is refreshed to display the most recent trusted address list after the synchronization
process is completed.
Querying trusted addresses
To perform a basic query:
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Dynamic Detection Information from the
navigation tree.
3. Click the Trusted Address List tab.
The Trusted Address List displays the MAC addresses of all trusted devices.
4. Enter a trusted address next to the query field. WSM supports fuzzy matching for this field.
5. Click the Query icon . The Trusted Address List displays all trusted addresses matching the
query criteria.
6. Clear the Query field, and click the Query icon to display all trusted addresses.
To perform an advanced query:
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Dynamic Detection Information from the
navigation tree.
3. Click the Trusted Address List tab.
The Trusted Address List displays the MAC addresses of all trusted devices.
4. Click the Advanced icon next to the query field to expand the area.
5. In the Query Criteria area, specify one or more of the following query criteria:
{
MAC Address—Enter a partial or complete MAC address in the format of xx:xx:xx:xx:xx:xx.
WSM supports fuzzy matching for this field.
{
Address Type—Select the device type. Options are All, Static, Dynamic, and Static and
Dynamic.
{
AC—Select the AC whose Static Trusted Device List you want to query.
6. Click Query.
The Trusted Address List displays all trusted addresses matching the query criteria. Click Reset
to clear the query criteria and display all trusted addresses.