H3C Technologies H3C Intelligent Management Center - Manual (Page 182)

160
Configuring an AP group
Group configuration enables you to configure the APs, WLANs, and radio policies for an AP group.
To enable an AP to monitor the wireless network, make sure the following conditions are met:
• The AP is in an AP group.
• An 802.11a radio policy and an 802.11g radio policy are bound to the AP group.
To enable an AP to provide access services, in addition to the previous conditions, make sure at least
one WLAN is bound to the AP group.
Viewing the AP group list
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
3. Click the operation icon for the target Aruba AC, and select Group Configuration from the
menu.
The Group Configuration page appears and all AP groups are displayed in the AP group list.
AP group list
{
Name—Name of the AP group. You can click the name of an AP group to enter its
management page, on which you can manage the APs in the group.
{
APs in Group—Number of APs in the AP group.
{
Bind to WLAN—Click the icon for the target AP group to enter its Bind to WLAN page,
on which you can bind or unbind WLANs.
{
Radio policy bound—Click the icon for the target AP group to enter its Radio policy
bound page, on which you can bind or unbind the radio policies.
{
Delete—Click the icon for the target AP group to delete the group. You cannot delete the
default AP groups default and NoAuthApGroup.
On the Group Configuration page, you can also do the following:
{
Click Refresh to the refresh the page.
{
Click Related Operations to configure the WLAN or manage the radio policies.
If the AP group list contains enough entries, the following navigational aids are displayed.
{
Click the Next Page icon to page forward in the AP group list.
{
Click the Last Page icon to page forward to the end of the AP group list.
{
Click the Previous Page icon to page backward in the AP group list.
{
Click the First Page icon to page backward to the front of the AP group list.
Click 8, 15, 50, 100, or 200 at the upper right of the AP group list to configure how many
items per page you want to display.
NOTE:
You cannot sort the AP group list.