Querying wireless service alarms, Predefined traps of msm series wireless devices – H3C Technologies H3C Intelligent Management Center User Manual
Page 365

343
Querying wireless service alarms
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Wireless Service Alarm.
The page displays all wireless service alarms.
3.
In the query area, select one or more of the following query criteria:
{
Level—Select the alarm level. Options are Critical, Major, Minor, and Warning.
{
Recovery Status—Select the recovery status. Options are All, Recovered, and Unrecovered.
4.
Click Query.
The list displays all wireless service alarms matching the query criteria.
5.
Click Reset to clear the query criteria and display all wireless service alarms.
Predefined traps of MSM series wireless devices
lists all the predefined traps of MSM series wireless devices, including AC traps, AP traps,
and client traps. All predefined traps are generated by the device.
Table 23 MSM series wireless device traps
Trap type Trap name
Description
AC trap
Authentication System Status
Changes
The authentication status of the AC changed.
AC trap
IP Trace Tool Start/Stop
The IP Trace tool of the AC started or stopped.
AC trap
Authenticated User Number
Exceeds Threshold
The number of authenticated users reached the
threshold.
AC trap
Authenticated User Session
Number exceed Max Limited
The number of authenticated user sessions on the AC
reached the threshold.
AC trap
User Connection Number
exceed Max Limited
The number of user connections reached the upper limit.
AC trap
Access Controller Work State
Change
The operating state of the AC changed.
AC trap
Syslog Send Notification
The AC sent a syslog message.
AC trap
Syslog Match Notification
The syslog message sent by the AC matches the
predefined regular expression.
AC trap
SNR Level Is Low
The average SNR level of the AC is low.
AC trap
Station Association
Notification
A client station is associated with the fit AP managed by
the AC.
AC trap
Detected Unauthorized AP
The AC detected an unauthorized AP.
AC trap
AdminAccess Authentication
Failure
An administrator failed to log in to the AC.
AC trap
AdminAccess Authentication
Success
An administrator logged in to the AC.
AC trap
System Cold Start
The AC booted up.