H3C Technologies H3C Intelligent Management Center - Manual (Page 677)

655
• Begin Time/End Time—These two parameters appear only when you select Custom Range. Click
the field next to Begin Time/End Time to select the start time/end time from the calendar that
appears, in the format of YYYY-MM-DD hh:mm. The end time must be later than the start time.
Figure 112 shows an example SSID statistics report.
Figure 112 SSID statistics report
SSID statistics report fields:
• Report Period—Time range during which the statistics are collected.
• Location—Name of the location view for which the statistics are collected or All AP Devices.
• SSID—Service set identifier.
• Transmitted Radio Traffic (MB)—Total traffic transmitted by the APs that use SSID.
• Received Radio Traffic (MB)—Total traffic received by the APs that use the SSID.