H3C Technologies H3C Intelligent Management Center - Manual (Page 143)

121
The Modify RRM Calibration Group page appears.
6. Modify the following parameters as needed:
{
ID—It cannot be modified.
{
Channel Hold Time (M)—Enter a channel hold-down time of the radios in the RRM calibration
group.
{
Power Hold Time (M)—Enter a power hold-down time of the radios in the RRM calibration
group.
{
Description—Enter a description for the RRM calibration group.
7. Click OK.
Deleting an RRM calibration group
After an RRM calibration group is deleted, the radios in the group no longer adjust the channel hold-
down time and power hold-down time.
To delete an RRM calibration group:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
3. Click the device label of the target AC.
4. Click the RRM Calibration Group link in the RRM Management area to the right of the page. All
the RRM calibration group information of the AC is displayed in the RRM Calibration Group List.
5. Click the Delete icon for the RRM calibration group you want to delete.
A confirmation dialog box appears.
6. Click OK.
Viewing radios in an RRM calibration group
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
3. Click the device label of the target AC.
4. Click the RRM Calibration Group link in the RRM Management area to the right of the page. All
the RRM calibration group information of the AC is displayed in the RRM Calibration Group List.
5. Click the ID of the RRM calibration group whose radio information you want to view.
The Radio List of RRM Calibration page appears.
RRM calibration group Radio List contents
{
AP Label—Label of the fit AP to which the radio belongs.
{
SN—Serial number of the fit AP to which the radio belongs.
{
Radio ID—ID of the radio.
{
Radio Type—Select a radio type. Options are:
− 802.11a
− 802.11b
− 802.11g
− 802.11gn