H3C Technologies H3C Intelligent Management Center - Manual (Page 85)

63
NOTE:
You can sort the WLAN List by every field except the Operation field. Click the column label to sort the
list by the selected field. The column label allows you to toggle between the various sort options specific
to each field.
Viewing the WLAN details
1. Click the Service tab.
From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
2. Click the Operation icon for the target AC.
3. Select WLAN Configuration from the menu.
4. Click the SSID of the WLAN you want to view.
The WLAN Details page appears.
WLAN details contents
Basic Information
{
VSC Name—Name of the VSC.
{
Status—State of the WLAN, Enable or Disable. A WLAN can provide wireless services only
when it is in Enable state.
{
SSID—SSID of the WLAN.
{
VLAN Tagging—Indicates whether the WLAN can be bound to a VLAN.
{
VLAN ID—ID of the VLAN bound to the WLAN. Wireless clients that access the WLAN are
added automatically to the bound VLAN. This field is empty if the VLAN Tagging is set to
Disable.
{
Broadcast SSID—Indicates whether to enable fit APs in groups bound with the WLAN to
broadcast the SSID in beacon frames.
{
Inter-Client Blocking— Enable or disable access between clients that access the WLAN.
Security Information
{
Encryption—Encryption mode used by the WLAN. Options are:
− None
− Static WEP
− Dynamic WEP
− WPA Pre-Shared Key
− WPA 802.1X
{
Key Length—Length of the key, 64 bits or 128 bits.
{
Key Type—Type of the key: ASCII or HEX.
{
Key Index—Index of the key: 1, 2, 3, or 4.
{
Key—key value.
{
Version—WPA version: WPA, WPA2, or WPA + WPA2.
{
Cipher—Link layer protocol used for data frame encryption and decryption. Options are TKIP,
CCMP (AES), and TKIP+CCMP (AES).