H3C Technologies H3C Intelligent Management Center - Manual (Page 463)

441
a. Select the Match Criteria. Options are Greater than, Smaller than, and Between.
− Greater than—Matches values greater than or equal to the specified value.
− Smaller than—Matches values smaller than the specified value.
− Between—Matches values between the specified value range.
b. Enter a Start Value. The number of associated clients, in the range of 0 to 127.
c. Enter an End Value. The number of associated clients, which must be greater than the start
value. The valid value is in the range of 1 to 128. This field is required when the match
criteria is specified as Between.
11. Configure the number of detected APs to match APs:
a. Select the Match Criteria. Options are Greater than, Smaller than, and Between.
− Greater than—Matches values greater than or equal to the specified value.
− Smaller than—Matches values smaller than the specified value.
− Between—Matches values between the specified value range.
b. Enter a Start Value. The number of detected APs, in the range of 0 to 127.
c. Enter an End Value. The number of detected APs, which must be greater than the start value.
The valid value is in the range of 1 to 128. This field is required when Between is specified
as the match criteria.
12. Configure the device vendor. WIPS matches the vendors of APs or the OUI to which the MAC
addresses of the APs belong.
a. Select Device Vendor.
b. Select OUI or Vendor Name from the list.
c. Enter an OUI in the format of xx:xx:xx, or enter a vendor name. For the characters that a
vendor name can contain, see the Tip.
13. Click OK.
Modifying an AP categorization rule
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Virtual Security Domain from the navigation tree.
3. Click the AP Categorization Rule tab.
The AP categorization rule list displays all AP categorization rules.
4. Click the Operation icon for the AP categorization rule you want to modify.
5. Click Modify.
The page for modifying an AP categorization rule appears.
6. Modify parameters of the AP categorization rule.
The name of the AP categorization rule and the AC cannot be modified. For more information
about configuring other parameters, see "
Adding an AP categorization rule ."
7. Click OK.
Deleting AP categorization rules
Deleting an AP categorization rule deletes all configurations of the AP categorization rule.
To delete AP categorization rules:
1. Click the Service tab.