H3C Technologies H3C Intelligent Management Center - Manual (Page 358)

336
To export all fit AP access ports:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > AP Access Ports.
The AP Access Ports page appears.
3. Click the Fit AP tab.
The Device List page displays all fit AP access ports and the related fit AP information.
4. Click Export.
5. Click the Export Result link to open or save the export file on the local host.
Configuring PoE on a fit AP access port
If the access device directly connects to the fit AP and the AP access port supports the PoE function,
you can enable or disable the PoE function on the AP access port.
PoE technology enables a device to remotely supply power to powered devices on twisted pair
cabling through Ethernet copper ports.
If you disable PoE on fit AP access ports, the connected fit AP that uses no external power supply
stops working.
To disable or enable PoE on a fit AP access port:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > AP Access Ports.
The AP Access Ports page appears.
3. Click the Fit AP tab.
The Device List page displays all fit AP access ports and the related fit AP information.
4. Click the Operation icon for the fit AP where you want to enable or disable PoE.
5. To disable PoE on the fit AP, select the Disable PoE icon on the menu that appears.
6. To enable PoE on the fit AP, select the Enable PoE icon on the menu that appears.
Managing fat AP access ports
WSM allows you to manage fat AP access ports on the AP Access Ports page.
Viewing fat AP access ports
You can view all fat AP access ports managed in WSM and information about the related fat APs,
including the following:
• status
• name
• SN
• IP address
• MAC address
• access device