Querying wlan logical interfaces, Adding a wlan logical interface – H3C Technologies H3C Intelligent Management Center User Manual
Page 117
95
{
Operation—Click the Operation icon
for the WLAN logical interface to display the
operation menu.
The operational tasks provided in the Operation menu are Delete Interface, Modify Port Security,
and Modify VLAN.
5.
Click More, and select Configuration Management, Configure Radio Batches or Service Policy
Management to enter the configuration page.
If the Wireless Logical Interface List contains enough entries, the following navigational aids are
displayed.
Navigating the Wireless Logical Interface List
•
Click the Next Page icon
to page forward in the Wireless Logical Interface List.
•
Click the Last Page icon
to page forward to the end of the Wireless Logical Interface List.
•
Click the Previous Page icon
to page backward in the Wireless Logical Interface List.
•
Click the First Page icon
to page backward to the front of the Wireless Logical Interface List.
To configure the number of items you want to display on each page, click 8, 15, 50, 100, or 200 at
the upper right of the Wireless Logical Interface List.
NOTE:
You can sort the Wireless Logical Interface List by every field except the Operation field. Click the
column label to sort the list by the selected field. The column label allows you to toggle between the
various sort options specific to each field.
Querying WLAN logical interfaces
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > ACs.
The AC List page displays all ACs.
3.
Click the Operation icon
for the AC you want to query.
4.
Select
Wireless Logical Interface Configuration from the menu.
The Wireless Logical Interface Configuration page appears. All the WLAN logical interface
information of the AC is displayed on WLAN Logical Interface List.
5.
Enter or select one or both of the following query criteria:
{
Description—Enter a description for the interface. WSM supports fuzzy matching for this
field.
{
SSID—Enter the SSID of the AC. WSM supports fuzzy matching for this field.
An empty field or a field that is set to Unlimited does not serve as a query criterion.
6.
Click Query. The Device List displays all radio interfaces matching the query criteria. Click Reset
to clear the query criteria and display all radio interfaces.
Adding a WLAN logical interface
1.
Click the Service tab.