H3C Technologies H3C Intelligent Management Center - Manual (Page 527)

505
Figure 60 Displaying operating channels (2.4 GHz)
Displaying APs using a specific SSID on the map
You can display APs using a specific SSID on the map in the following way:
Right-click on a blank area, and from the shortcut menu, select one of the following:
• Show Signal Cover Area > By SSID > 2.4GHz
• Show Signal Cover Area > By SSID > 5GHz
Select an SSID from the SSID List in the window that appears.
The map displays the signal coverage area of APs that use the selected SSID. Click to view the signal
strength, as shown in Figure 61 .